Before booting the system, check the following:

Click for instructions

1. The scanbed is fully out of the scanner

Click for video

Click for instructions

2. Both doors in the scan room are vacuum locked.

3) To turn the system on (both scanner and scanning software), the key that locks the system power should be turned to its on position (close up picture).

4) With the key pointing to the unlocked graphic, push the System On button . This main system power button will activate all necessary components.

5) The Syngo software interface will load up automatically after a series of countdown screens. Startup time will be at least 3 minutes. To monitor progress, check these windows. If you don't see the countdown "Syngo MR" screens, click here

Normal system startup page (cick to enlarge)

Click for video on how to start up the scanner

Step 1: Preparing subject in the scan room

Step 2: Register a subject

Step 3: Start a scan

Step 4: Remove subject from scanner

Step 5: Save or send a scan to a CD or computer

Step 6: Delete archived data from computer

Step 7: Leaving system

next: scanning sequences...